Test fitting the forward turret

Turret test fitted,turret height yet to be adjusted.

Fit is good and the turret is vertical,having to follow the deck curve/slope and mantain proper alignment would have been a nightmare!

The boat is quite a tight fit inside a Smart fortwo.

Drilling turret and gun platform bases.

Drilling aft turret base with the boat level

Same with forward turret.

Cutting out the foredeck gun platform base; deck level fore to aft,boat level athwartships.

Finished....

Stance control equipment and drilling guides.

Foredeck gun pad located

Center drilled.

Centering pin and drill guide plate(scrap steel bar)

Guide plate fixed in place

Leveling out the hull.(fore to aft)

And athwartship.

Two bubble levels fitted into the hull(engine room)

Planking the deck.

Jig for coamings, deck planks laid around it.

Stern planking,plastic strip  spares location for gunwhale guard covering board.

About 50% of planking completed.

Coaming jig removed,white plastic card is chart table linoleum covering.

Lower hull:weathering&sealing.

Adding barnacles with magic sculpt

Adding waterline marine growth with acrilic gel a laser level line is used to mark the waterline.

More acrilic gel to build up algaes,oil colours to give the right tint and a semi gloss clear paint layer to give that wet effect.