Drilling turret and gun platform bases.

Drilling aft turret base with the boat level

Same with forward turret.

Cutting out the foredeck gun platform base; deck level fore to aft,boat level athwartships.

Finished....

Stance control equipment and drilling guides.

Foredeck gun pad located

Center drilled.

Centering pin and drill guide plate(scrap steel bar)

Guide plate fixed in place

Leveling out the hull.(fore to aft)

And athwartship.

Two bubble levels fitted into the hull(engine room)

Planking the deck.

Jig for coamings, deck planks laid around it.

Stern planking,plastic strip  spares location for gunwhale guard covering board.

About 50% of planking completed.

Coaming jig removed,white plastic card is chart table linoleum covering.

Lower hull:weathering&sealing.

Adding barnacles with magic sculpt

Adding waterline marine growth with acrilic gel a laser level line is used to mark the waterline.

More acrilic gel to build up algaes,oil colours to give the right tint and a semi gloss clear paint layer to give that wet effect.

More work on the control linkage of the butterfly valves:

Cutting out the clevis forks.

Turning clevis collar and pushrod end piece.

Part installed on 1.2mm brass rod,torque tube arm test fitted.

Two complete pushrods.

Installed & primed.

Butterfly valve closeup,the center muffler is slightly askew,but not readily visible.

Bellcrank closeup.

Another overall view.The planks on the transom are also barely visible,exactely the effect I was after.

Butterfly valves,bellcranks and connecting rods.

Bellcrank,ball joint and connecting rod.

Mufflers installed,lower hull weathering in progress,butterflyvalves and control apparatus installed.

Close up

General wiev,still missing the main pushrod, everything else in place.

Muffler details .

Muffler construction: brass & plastic card

3 phases in turning the connecting piece.

Drilling out the valve axe bearing

Drilling screw holes

Finished connecting piece

A bunch of turned parts

In the soldering jig

First three pieces (starboard)

Assembly completed & primed,still some blemishes to fix

Test fitted to the hull,looks nice!